Installation
This guide covers installing Librescoot on your unu Scooter Pro.
Installer App (Recommended)
The installer is a desktop app that walks you through the entire process. It handles firmware downloads, flashing both boards, and setting up offline maps. You just need a USB cable and a screwdriver.
Beta software
The installer is in beta. While we have tested on all platforms against real hardware, things can still go wrong. In the worst case, your scooter might become inoperable without deeper intervention. Use at your own risk, no warranty expressed or implied. For support, try Discord, but keep in mind we're all volunteers.
What you need
- unu Scooter Pro
- USB cable (Mini-B on the scooter side)
- PH2 screwdriver or H4 hex driver for the footwell panel screws
- About 20 minutes
Download
Version 1.0.22 (beta) · All downloads · All releases · Source code
First launch notes
The macOS build is signed and notarized, so it opens with no warning. The Windows build is not yet code-signed.
- Windows: SmartScreen will flag the installer. Click More info, then Run anyway.
- Linux: Make the binary executable with
chmod +xif needed.
The installer handles driver installation, network setup, and elevation on its own. On Linux, it needs to run as root for USB access. On macOS, it will prompt for your password. On Windows, it installs a USB Ethernet driver automatically.
Manual Installation
If the installer doesn't work for your setup, you can flash both boards manually with a 3.3V serial adapter and U-Boot. This needs physical access to both boards and their UART debug headers, plus comfort with a serial terminal.