Dashboard Menu Reference

This page shows the dashboard menu in Librescoot 1.2.x.

While parked on the speedometer, map or debug screen, pull the left brake twice quickly to open the menu. Follow the on-screen controls to move, select or go back; selecting a setting with choices moves to the next choice.

Main menu

Disable Service Mode
- Turns off Service Mode. Shown only while it is on.
Activate Hop-on
- Activates hop-on mode. Shown only after you set a combo under Settings → Hop On / Hop Off….
Navigation
- Plan a route. Shown when a map can be displayed and routing is available, either on the scooter or online with a connected modem.
- Enter Address…
  - Choose an address to navigate to.
- Recent Destinations
  - Choose from up to ten places you have navigated to. Shown when you have recent destinations.
  - Each destination — shown by its name or coordinates.
    - Start Navigation — navigate there.
    - Save Location — add it to your saved locations.
    - Delete Location — remove it from recent destinations.
- Saved Locations
  - Save Current Location — save your current position.
  - Each saved location — shown by its name or coordinates.
    - Start Navigation — navigate there.
    - Delete Location — remove it from your saved locations.
- Stop Navigation
  - Clears the route. This entry remains visible even when no route is active.
- Maps & Routing…
  - Open the map and routing setup screen.
Set up Navigation
- Opens routing setup. Shown when routing is not ready.
Switch to Cluster View
- Opens the speedometer view. Shown on the map screen.
Switch to Map View
- Opens the map. Shown on the speedometer when offline maps are available or online maps are selected.
Set up Map Mode
- Opens map setup. Shown on the speedometer when offline maps are missing and online maps are not selected.
Lock Scooter
- Locks the scooter. Shown while parked.
Toggle Hazard Lights
- Turns both blinkers on, or turns them off if they are already on.
Faults
- Opens the fault list. Shown only when faults are active, with their count beside the title.
Settings
- All settings are listed below.
About & Licenses
- View software information and licenses.
Exit Menu
- Close the menu.

Settings

Theme
- Automatic — change between light and dark automatically.
- Dark — keep the dark theme.
- Light — keep the light theme.
Backlight
- Automatic — adjust brightness to ambient light.
- Low — keep the backlight dim.
- Medium — use medium brightness.
- High — use high brightness.
Power Display
- Power (kW) — show motor power in kilowatts.
- Current (A) — show current in amperes.
Milestone Celebrations
- Off — no odometer celebrations.
- On — show celebrations at distance milestones.
Hop On / Hop Off…
- Set up hop-on mode. Opens an introduction if you have no combo yet; otherwise offers these choices:
- Set new combo… — record a new control sequence.
- Disable hop-on — remove the combo.
Status Bar
- Battery Display
  - Percentage — show remaining battery charge as a percentage.
  - Range (km) — show estimated riding range.
  - Icons Only — show battery icons without a number.
- CBB Battery
  - Always — always show the backup battery indicator.
  - When Low — show it when the backup battery is low.
  - Never — hide it.
- 12V Battery
  - Always — always show the auxiliary battery indicator.
  - When Low — show it when the auxiliary battery is low.
  - Never — hide it.
- GPS Icon
  - Always — keep the icon visible.
  - Active or Error — show it when GPS is active or has a problem.
  - Error Only — show it only when there is a problem.
  - Never — hide it.
- Bluetooth Icon
  - Always — keep the icon visible.
  - Active or Error — show it when Bluetooth is active or has a problem.
  - Error Only — show it only when there is a problem.
  - Never — hide it.
- Cloud Icon
  - Always — keep the icon visible.
  - Active or Error — show it when the cloud connection is active or has a problem.
  - Error Only — show it only when there is a problem.
  - Never — hide it.
- Internet Icon
  - Always — keep the icon visible.
  - Active or Error — show it when internet is active or has a problem.
  - Error Only — show it only when there is a problem.
  - Never — hide it.
- Clock
  - Always — show the time.
  - Never — hide the clock.
- Temperature
  - Always — always show temperature.
  - Warning Only — show it only when a temperature warning needs attention.
  - Never — hide it.
Map & Navigation
- Map Type
  - Online — load map tiles over the internet.
  - Offline — use maps stored on the scooter.
- Navigation Routing
  - Online — get routes from an online routing service.
  - Offline — calculate routes on the scooter.
- Map Update Check
  - Off — do not check for map updates automatically.
  - On — check automatically for new maps.
- Auto-download Maps
  - Off — leave new maps for you to download.
  - On — download available map updates automatically.
Blinker
- Blinker Style
  - Icon (default) — show a blinker icon.
  - Fullscreen Arrow — show a larger on-screen arrow.
- DBC Blinker LED
  - Off — do not use the dashboard's physical blinker light.
  - On — flash the dashboard's physical blinker light.
Alarm
- Enable on Lock
  - Off — disable the alarm.
  - On — enable it.
- Honk on Trigger
  - Off — no horn during an alarm.
  - On — sound the horn during an alarm.
- Duration
  - Short (10s) — sound for 10 seconds.
  - Medium (20s) — sound for 20 seconds.
  - Long (30s) — sound for 30 seconds.
System
- Language
  - English — use English menus.
  - Deutsch — use German menus.
- Battery Mode
  - Single Battery — one battery is connected.
  - Dual Battery — two batteries are connected; use only with dual-battery wiring.
- Horn While Seatbox Open
  - Off — prevent accidental honking when the open seatbox lid presses the horn button.
  - On — allow the horn while the seatbox is open.
- Update Mode…
  - Open the instructions for transferring files to the scooter over USB.
- Service Mode
  - Turns on Service Mode. Shown only while it is off.
- Faults
  - Opens the fault list. The number of active faults appears next to the title.
- Capture Logs
  - Collect diagnostic logs; a notification reports when it finishes.